Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Temple City
A new driveway gate in Temple City typically runs $2,800-$7,500 installed, with automation adding $1,200-$3,400 depending on opener brand and gate weight. Most installations in Temple City take one to two days, and we quote the full price before any work begins. Call (424) 300-8579 for a free measure and written estimate. Our crews know the ranch-house setbacks, block-wall perimeters, and the dense ornamental iron gates that define Temple City’s neighborhoods.
Why Ironworks Gate Co. Is Temple City’s Preferred Gate Installation Company
We have worked on enough Temple City driveways to know what actually goes wrong here. The city’s postwar ranch homes, most built between the late 1940s and the 1970s, rarely came with gates. Homeowners added them later, often during the 2000s-2010s renovation wave, which means we are frequently working with concrete and masonry that was never designed to carry a 400-pound ornamental iron swing gate. That is not a reason to turn down the job. It is a reason to dig the footing deeper and size the hinge post correctly the first time.
Victor Salinas runs our crews, and he has kept the same standard for over 42 years: the 400th gate gets the same care as the first. Temple City homeowners call us because they remember the last contractor who cut a corner and disappeared. We do not disappear. We show up when we say, quote a fair price, and back every installation with our written 90-Day Done Right Promise. No paperwork, no arguing. If it is not right, we come back and make it right.
We serve all of Temple City, from the streets north of Las Tunas Drive down to the neighborhoods near Lower Azusa Road. Our Gate Installation team is dispatched from our Los Angeles office, and a live person answers the phone 24 hours a day, 7 days a week.
Our Gate Installation Services in Temple City
Every installation starts with a site visit. We measure the opening, check the existing concrete or block wall, look at the grade, and figure out what the gate actually needs to carry. Then we give you a written price. Here is what we install most often in Temple City.
Driveway Gate
Temple City’s ranch homes and rebuilt properties run heavily toward ornamental iron driveway gates, many installed during that 2000s-2015s wave. A new driveway gate here needs to match the home’s perimeter wall, clear the driveway slope, and hold up to summer heat that regularly hits 100°F or more. We build for that. Powder-coated steel, properly spaced pickets, and a hinge assembly sized for the actual gate weight, not a guess.
Pedestrian Gate
A side pedestrian gate in Temple City does a specific job: it lets people through without opening the big driveway gate every time. We install matched pedestrian gates next to the driveway or along the side of the house, keyed locks or electric strikes, and we set the post deep enough that it will not lean in three years. Temple City’s clay-heavy soil shifts with the rain-dry cycle, and a shallow post will show it.
Sliding Gate
Sliding gates are the right answer for wide driveways where a swing gate would eat half the front yard or hit a parked car. On long acreage entrances off Lower Azusa Road and the wider lots near the city’s north end, we install rack and pinion slide gates with heavy-duty operators rated for the gate’s full travel weight. A slide gate lives or dies by its footing and rail alignment, and we pour for the load, not for the lowest bid.
Swing Gate
Double swing gates are common in Temple City, especially where a home has a wide driveway and two-car or three-car parking. The failure we see most is a sagging gate leaf because the original post was set into a thin existing slab instead of a proper footing. We re-pour the footing, set a heavier post, and hang the gate so it swings true for years. Then we tune the opener’s limit settings so it does not cook itself in summer heat.
Solar Gate Opener
Some Temple City properties, particularly on longer lots or acreage entrances, have no practical way to run conduit out to the gate. That is where a solar gate opener makes sense. We install solar-powered operators for slide and swing gates, with a battery bank sized for the gate’s daily cycles and a panel positioned for the San Gabriel Valley’s strong summer sun. No trenching, no new circuits, no monthly energy draw.
Double Gate
A double gate means two leaves, two sets of hinges, and usually one operator pulling both. The weak point is the center stile, where two gates meet. Santa Ana winds funnel through the valley each fall, and a light aluminum double gate without wind bracing will rack or bend right there. We brace the center, align the leaves, and install an operator rated for the combined load. Temple City gets these winds every year. We build for them.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Temple City
We install and service nine major gate-automation brands, including LiftMaster, Mighty Mule, FAAC, and BFT. Temple City’s stock of 10-to-15-year-old LiftMaster and Elite operators keeps our parts bins full and our techs familiar with exactly what fails on those systems. Whatever opener ends up on your driveway, we stock local replacement parts and keep common boards and limit switches on the truck so we are not waiting on a warehouse in another state. Most jobs finish in a single visit.
Common Gate Installation Problems We See in Temple City Homes
- Retrofitted posts cracking the old slab. A 20-foot ornamental iron swing gate hung on a post that was set into a 1950s ranch-house concrete pad will eventually crack the slab. The gate drags, the opener strains, and the whole thing gets worse each season. We dig the old footing out and pour a proper pier.
- Santa Ana wind damage on aluminum double gates. Unbraced aluminum gates rack at the center stile during fall wind events, throwing the operator’s limit settings off. The gate then overruns, bangs the stop, and burns out the motor. Bracing the center and reprogramming the limits fixes it.
- Thermal expansion knocking limits out. Inland San Gabriel Valley summers bring 100-105°F days. Steel expands, gates move a fraction, and older openers lose their limit settings. We see this every June through September in Temple City. The fix is a limit re-set plus a maintenance visit to catch what the heat has already loosened.
- Missing or failed entrapment protection. Gates installed in the 2000s with LiftMaster or Elite operators often never got modern safety photocells. On a long driveway approach in Temple City, that means a vehicle or a child can be in the gate’s path with no automatic reverse. This is a safety issue first and a liability second. We retrofit photocells and edge sensors on every new and repaired installation.
Pricing for Gate Installation in Temple City, CA
Here are honest numbers for the Temple City market. A basic single swing driveway gate, manual, runs $2,800-$4,500 installed. A double ornamental iron swing gate with automation runs $5,500-$9,000 depending on gate weight and opener brand. A sliding gate on a wider driveway or acreage entrance typically lands at $4,500-$8,000. Solar gate opener systems add $1,800-$3,400 including panel, battery, and labor. These are the ranges we have quoted and built to across Temple City. The exact price depends on your opening, your existing wall or posts, and the gate weight. What we do not do is change the number after work starts. You get the full price in writing before we turn a single bolt, and every completed job is covered by our written 90-Day Done Right Promise.
We also honor standing offers for Temple City homeowners: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (424) 300-8579 and we will schedule the free measure.
We Also Serve Cities Near Temple City
Our crews cover the surrounding San Gabriel Valley communities every week, including El Monte, San Gabriel, Arcadia, and Rosemead. If you are just outside Temple City and looking for the same standard of gate work, call us and we will put you on the schedule.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Temple City
The most common reason is a hinge post set into a shallow or undersized footing that was never meant to carry a heavy ornamental gate. With 100°F-plus summer heat, the steel expands, the post shifts, and the gate leaf drops. The fix is a deeper footing and a properly sized post, not just a hinge adjustment. Call (424) 300-8579 and we will measure what is actually holding your gate up.
Yes. Solar gate openers are a standard installation for us on Temple City properties where running conduit is impractical or too costly. We size the panel and battery bank to the gate’s daily cycle count and the San Gabriel Valley’s strong summer sun, then set the system to keep working through winter’s shorter days. The estimate is free, and the price is fixed before we start.
It depends on the operator’s condition and whether it has modern safety photocells. If the board and motor are sound, a limit re-set plus a maintenance pass usually corrects the overrun. If the operator has never had entrapment protection upgraded, replacement is often the better call. We will tell you which one your situation warrants and quote both straight. You decide, with the price in writing before work begins.
If vehicles need to trigger the gate automatically without anyone getting out, yes. A loop detector buried in the driveway senses the truck and opens the gate, then holds it until the vehicle clears. We install loop detectors on double swing and slide gates across Temple City, including on acreage entrances where livestock trailers and delivery trucks are a daily occurrence. The detector prevents the gate from closing on a vehicle that is still half in the opening.
Automatic gates must have entrapment protection, typically photo eyes across the gate opening and reversing edges on the gate itself, because a gate that closes on a person or vehicle is a serious injury risk. Many Temple City gates installed in the 2000s with LiftMaster or Elite operators never had this protection added. We retrofit it on every install and repair. If your gate lacks photocells or reversing edges, call (424) 300-8579 and we will get it corrected.
Contact Ironworks Gate Co. for Gate Installation in Temple City
If you are in Temple City and your gate is sagging, racking, overrunning, or simply done, call us. We will send a background-checked, uniformed technician to measure the job and hand you a written price. You are not getting a call center and you are not getting a handyman with a truck and a guess. You are getting a company that has specialized in gates for over 42 years, under the direction of Victor Salinas, and that stands behind every job with a written 90-Day Done Right Promise. Call (424) 300-8579 for a free estimate. We will be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Temple City with gate installation and repair.