Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Temple City
A gate motor replacement or opener repair in Temple City typically runs between $280 and $840 for most residential jobs, depending on whether we’re rebuilding an old operator or installing a new one on a retrofit post. Most repair calls are completed the same day, and our crews arrive in Temple City from the Los Angeles office within about an hour of dispatch. Temple City’s gate stock is unusual: this is a city where ornamental iron and aluminum driveway gates went up by the hundreds during the 2000s and 2010s remodel wave, and those operators are now hitting the age where limit switches fail, batteries die, and rack gears strip. That’s the work we do most often here, and we know the specific failure patterns of this city’s gates better than any generalist contractor. When your gate motor quits, call (424) 300-8579 and a live person answers, day or night.
Why Ironworks Gate Co. Is Temple City’s Preferred Gate Motor & Opener Company
We’ve been running our Gate Motor & Opener crews into Temple City long enough to know the difference between a Gate 8 neighborhood ranch home and a Las Tunas Drive frontage property with a zero-setback gate. That matters because post depth and footing quality change from block to block. Older ranch homes in the 91780 zip fought with shallow footings poured in the 1950s, while newer remodels off Temple City Boulevard often have proper reinforced posts but substandard operator mounting plates. Our technicians are trained on nine automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we’re not guessing at the wiring diagram when we arrive. Every job is protected by the 90-Day Done Right Promise, a written guarantee. No paperwork, no phone tag, no arguing. If it’s not right, we come back and make it right.
Victor Salinas leads our crews, and he’s particular about two things: arriving when we say we will, and giving you a square-deal price before a single bolt is turned. That’s been the standard since 1984, across 42 years of gate work. We’re background-checked, uniformed, and we treat your driveway the way we’d treat our own mother’s. And when you call, a live person picks up. 24 hours a day, 7 days a week. Not a voicemail tree.
Our Gate Motor & Opener Services in Temple City
Motor Installation
New operator installation in Temple City most often means retrofitting a motor onto a gate and posts that were never designed for automation. The posts were set in the original ranch home’s concrete, and the gate itself may be a heavy wrought iron piece built during a 2000s remodel. We handle the full install: post reinforcement or replacement, operator mounting, limit setting, safety edge installation, and testing under load. A typical residential swing gate motor install in Temple City runs $850 to $1,600 including the operator, while slide gate installations with rack and pinion run $1,200 to $2,400 depending on gate weight and panel/battery configuration.
Motor Repair
The majority of Temple City repair calls are for operators that are 10 to 15 years old and have never had a service visit. Limit switches have drifted out of adjustment from thermal cycling, capacitors are weak, and gears are scored. We replace or rebuild what’s worn, re-set the travel limits, and torque every mounting bolt. A standard residential motor repair runs $180 to $480. If the operator is beyond economical repair, we’ll tell you straight and quote a replacement instead of stringing you along. Remember: $50 off any repair over $250, and that’s written on the estimate.
Linear Motor
Linear arm operators are common on Temple City’s ornamental iron swing gates, particularly where the gate leaf is heavy and a traditional underground or articulated arm operator would fail early. The problem we see repeatedly in Temple City is a linear arm that was undersized for the gate weight from the start. A wrought iron gate off Longden Avenue can easily weigh 400 pounds, and a cheap residential linear motor rated for 300 pounds will burn through its gearbox in three summers. We size and install linear motors for the actual gate weight plus a margin for wind loading, and we replace worn units with properly rated models.
Slide Motor
Slide gates on Temple City ranch homes are often the workhorses of the property: wide driveway entrances, heavy panels, and daily cycling. The rack and pinion is the first thing to fail when a gate sags or the post footing spalls. On Garibaldi Avenue near the northern edge of Temple City, we were called out to a 12-year-old LiftMaster LA400 slide gate operator on a custom wrought iron gate that had started slamming at the end of travel. The original install had set the rack and pinion on a spalling concrete post, and a sag correction at the hinge post was never done. Our crew re-anchored the operator to a fresh post footing, replaced the rack gear, and reset the limit switches. The gate now closes quietly and smoothly. Slide motor repair in Temple City runs $320 to $900 depending on rack replacement and post work; full slide operator replacement runs $1,200 to $2,400.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Temple City
We stock common boards, gears, capacitors, and limit switches for LiftMaster, FAAC, BFT, and Mighty Mule on our trucks that serve Temple City, which means many repairs are completed on the first trip. If we need a part we don’t carry, we source it from our Los Angeles supply chain and return within a day or two, not a week. Temple City homeowners rarely want to wait on a gate that won’t open, so we built our parts inventory around the brands that dominate this city’s gate stock: LiftMaster from the big remodel wave, FAAC on higher-end iron gates, and Mighty Mule on ranch and utility entrances.
Common Gate Motor & Opener Problems We See in Temple City Homes
- Solar panel batteries dying young. Temple City’s summer heat regularly exceeds 100°F, which cuts lead-acid battery capacity sharply. Many solar gate openers here were installed with a 10-watt panel that can’t keep up with a high-draw slide motor in July. We upgrade to properly sized panels and lithium-iron batteries that survive inland heat far better.
- Limit switches drifting in hot weather. Thermal expansion from San Gabriel Valley heat waves knocks LiftMaster and Elite swing operators out of their limit settings. The gate reverses mid-cycle or slams into the post. We re-set limits and often install heat-tolerant switches on these retrofit jobs.
- Santa Ana wind racking. Fall wind events funnel through the valley and hit lighter aluminum gates hard. Gates anchored into 1950s ranch-home concrete without a proper post footing can bend enough to strip the rack and pinion on a slide operator. We repair the damage and reinforce the post and gate leaf to handle the next event.
- Substandard retrofit footings. Many Temple City gate posts went in during a remodel, set into whatever old concrete was there rather than poured new. Over a decade of daily cycling, the post moves minutely and the operator takes the strain. We find the cracked footing, expose it, and pour a proper reinforced base before re-hanging and re-aligning the operator.
Pricing for Gate Motor & Opener in Temple City, CA
We Also Serve Cities Near Temple City
Our crews regularly work in Temple City and the surrounding San Gabriel Valley communities, covering El Monte, San Gabriel, Arcadia, and Rosemead with the same day service and written guarantee. If you live near the Temple City border, or your property sits in unincorporated county land between cities, call us and we’ll confirm coverage.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Temple City
My Temple City home has a swing gate on a 2000s-era retrofit post - can you add a battery backup to the existing LiftMaster operator?
Yes, and we do this often on Temple City’s remodel-era gates where the LiftMaster operator is still in good shape but the homeowner wants uninterrupted access during power outages. We install a properly sized battery backup unit and re-test the full open/close cycle under battery power. Cost runs $350 to $700 for most residential LiftMaster swing operators in Temple City. Call (424) 300-8579 and we’ll assess your specific setup and give you a firm price.
How do you keep a solar gate opener working through a Santa Ana wind event in Temple City?
The first line of defense is a panel and battery sized for the actual load of the gate, not a generic kit from a hardware store. Temple City’s wind events often coincide with clear, low-angle fall sunlight, which can trick small panels into thinking they’re producing more than they are. We mount panels with a wind-resistant bracket angled for winter sun, use lithium-iron batteries that don’t lose capacity in heat, and check the gate’s own wind resistance so the operator isn’t fighting a flexing leaf. The goal is a gate that holds its line through the gusts and keeps the battery topped.
My slide gate operator is 15 years old and never serviced - is it worth repairing an Elite unit on a Temple City ranch entrance?
It depends on the condition of the rack, the post, and the gearbox. An Elite slide operator with a good gearbox, intact rack, and solid post is absolutely worth repairing, and a rebuild runs $320 to $700 here. But if the rack is stripped, the post is cracked, and the gearbox is howling, you’re looking at a replacement sooner than later. We’ll give you a straight answer based on what we find. Free estimate either way.
Does a Temple City ornamental iron gate need entrapment protection by law?
Yes. Any automated vehicular gate in California is required to have entrapment protection devices: photoelectric sensors, reversing edges, or the equivalent, installed and functioning. A gate that can close on a person, a pet, or a car is both a legal liability and a safety hazard. Many 2000s-era Temple City gate installs were done with minimal or bypassed safety devices. We bring every gate up to current standard on every job, no exceptions.
Why does my swing gate reverse before it fully opens on hot days in Temple City?
That’s a classic symptom of thermal expansion pushing the operator’s limit switch out of adjustment. When the metal warms and expands, the gate’s travel changes slightly, and the operator reads the new end-of-travel as an obstruction and reverses. We re-set the limits for the hottest months and check that the operator has enough margin for expansion. This is one of the most common hot-weather calls we get in Temple City, and it’s usually a quick fix, running $120 to $220 when it’s just a limit adjustment. Call us for an exact quote.
Call Ironworks Gate Co. for Gate Motor & Opener Work in Temple City
When your gate won’t open, call (424) 300-8579. A live person answers, 24/7. We’ll schedule a Temple City visit that fits your day, give you a written price before any work begins, and stand behind the job with our 90-Day Done Right Promise. If a piece of the gate has failed and you’re not sure what’s wrong, call anyway. We’d rather look at it now than have you stuck in the driveway on a Sunday morning.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Temple City and the San Gabriel Valley for over 42 years.